TURNER 420 - DECKEL Machine Tools Indonesia

Products

DRILLING MACHINE

TURRET MILLING MACHINE

LATHE MACHINE

Hardened and ground bed guideways
Guaranteed true running accuracy of the spindle nose of better than 0.015 mm
Main spindle running in an oil bath hardened and ground mounted on 2 adjustable precision taper roller bearings
All metric thread pitch in the range from 0.2 to 14 mm/r and all inch threads in the range from 72 - 2 threads per inch without replacing the change gears by means of gear levers adjustable on the control panel
Right-/Ieft-handed rotation at the bed slide, switchable via indexing spindle
Central lubrication at the bed slide
Cover for leading spindle
Adjustable scale of the threading gauge

Model	Turner 420 x 1000	Turner 420 x 1500
Code No	4242300	4242400
Electrical connection
Total connected value	2.2/3.3 kW	2.2/3.3 kW
Coolant equipment	100 W	100 W
Working areas
Centre height	210 mm	210 mm
Centre width	1000 mm	1500 mm
Swing over bed	Ø420 mm	Ø420 mm
Swing over cross slide	Ø250 mm	Ø250 mm
Bed width	250 mm	250 mm
Headstock
Spindle taper	MT6	MT6
Spindle seat	Camlock ASA D1 - 6"	Camlock ASA D1 - 6"
Spindle drilling, rod passage	Ø 52 mm	Ø 52 mm
Spindle speed	45 - 1800 rpm/30 - 1800 rpm	45 - 1800 rpm/30 - 1800 rpm
Number of steps	16 stages/for Vario-models electr. adjustable speed	16 stages/for Vario-models electr. adjustable speed
Slide
Travel top slide	140 mm	140 mm
Travel cross slide	230 mm	230 mm
Pitch - Metric in the range of	0.2 - 14 mm/rev;39 thread pitches	0.2 - 14 mm/rev;39 thread pitches
Pitch - Inch in the range of	72 - 2 threads/1";45 thread pitches	72 - 2 threads/1";45 thread pitches
Max. section of tool	20 x 20 mm	20 x 20 mm
Tailstock
Tailstock seat	MT4	MT4
Tailstock - sleeve travel	120 mm	120 mm
Quill diameter	50mm	50mm
Dimensions
Length	2060 mm	2550 mm
Width x Height	900 x 1650 (DPA 1615) mm	900 x 1650 (DPA 1615) mm
Net weight	1160/1350 kg	1340/1565 kg

Standard Accessories	Optional Accessories
Three-jaw lathe chuck Ø 200 mm	Four-jaw chuck Ø 250 mm
Splash board mounted	Face clamping disc Ø 350 mm
Lathe chuck protection	Reducing bush MT6/MT4
Chip protection at the top slide	Steady rest Passage Ø max. 145 mm
Reducing bush MT6/MT4	Follow rest Passage Ø max. 75 mm
Quadruple tool holder	Quick change tool post SWH5-B
2 steady centres MT4	Threading gauge

PERUSAHAAN YANG BEKERJASAMA DENGAN KAMI